Bespoke Exhaust System

Bespoke Exhaust System

Systems now on offer for Standard Puma AND Racing Puma

(using 2 1/4″ 57mm pipework and similar rear trim design

see parts desk for pricing information)

1-1-IMG_0361

1-DSCF0128

Now Available in the following Materials / Finish

1. Mild Steel – As per original System

This system is shaped very accurately, has excellent noise and vibration dissipation properties, and boasts a very satisfying deep sound

2. Stainless Steel Version

Noticeably louder system but with longer lasting pipework

3. ‘Show Car’ Fully Polished Stainless version

Fully polished from top to bottom for that proper bling show car finish

** Please click on PARTS DESK Tab for pricing **

** Click Here for YouTube presentation on the Exhaust System **


A completely new bespoke exhaust system is now available for Racing Puma owners. This system takes the best part of the original design and then has a few fitting tweaks and design features of it’s own.

Firstly, the token gesture of ‘give’ in the original system which was supplied by the steel springs can now be discarded, leaving the joint at the Conical ring gasket to be tightened up more securely with standard High Tensile bolts/nuts. This will result in a good solid seal for years. The Racing Puma, as many know already, is on such a knife edge of tolerance when it comes to MOT time, even a small leak here can make it impossible to pass the emissions testing procedure (small leakage can often be missed here as the system is a little loud)

My manifold is now no longer a rigid piece of exhaust.. as the pipes branch from four to two, I have incorporated a small flexi section here to provide a little more give between the engine and the centre section which results a more free and natural movement of the system with the engine and aids noise and vibration dissipation.

Custom made thick steel plate flanges have been laser cut for a strong and accurate fit.

The heat shield fixing points have been accurately placed for easy fitting of that too.

We Guarantee our system will fit better and sound FAR BETTER than your current stainless system or your money back, No Quibble!

Please note: only buying one piece of the system may not make a huge difference to the overall sound.


1-DSCF0114

The centre section features a 200 cell per inch sports cat and which also comes complete with a guard as standard. To eliminate any problem with fitting up to the manifold at the correct angle, the flange has been left as a ‘floating’ flange here and has also been custom designed with extra thick plate steel to ensure it will not bend, even when bolted up again years later.


1-DSCF0110

The back box features the Oval with center bar that owners will recognise and has specific silencing qualities that make it a really nice ‘deep burble’ to listen to, without it being ridiculously loud.

Any owner who remembers that great sound from the original mild steel system will surely jump at the chance to own a similar setup again.


EACH PIECE OF EXHAUST IS INTERCHANGABLE WITH THE ORIGINAL SYSTEM

 

1-DSCF0102

1-DSCF0231